Site Notice
  • We have a limited coverage policy. Please check our coverage page to see which articles are allowed.
  • Please no leaked content less than one year old, or videos of leaks.
  • Content copied verbatim from other websites or wikis will be removed.

e-Reader

From NintendoWiki, your source on Nintendo information. By fans, for fans.
Revision as of 15:44, 2 June 2020 by Torchickens (talk | contribs)
Jump to navigation Jump to search
e-Reader

Release year: JP: 2001
NA: 2002
Manufacturer: Nintendo
Compatible: Game Boy Advance
Model no.: Original: AGB-010
Updated: AGB-014

The e-Reader (Japanese: カードeリーダー Card e Reader) is a peripheral for the Game Boy Advance that is used to scan special cards in order to unlock new features in existing games, add new features to games that have e-Reader functionality, or to play minigames on the e-Reader itself. The peripheral was developed jointly by HAL Laboratory and Olympus, and was released in December 2001.

For the e-Reader's release in North America in 2002, it received a redesign, adding a Link Cable passthrough connector to the system to allow Link Cable functionality when using the e-Reader and adding internal memory. This version of the e-Reader was later released in Japan in June 2003 Card e-Reader+.

In North America, the e-Reader was discontinued in 2004 due to its lack of popularity and sales. Although the e-Reader had been announced for Europe, it was ultimately confirmed to have been canceled in July.[1]

Functionality

The e-Reader attaches to the Game Boy Advance through the system's cartridge slot. The Link Cable passthrough plugs into the Link Cable port, allowing the player to use Link Cables with the device. The Game Boy Advance SP and Game Boy micro are compatible with the e-Reader, but do not use the Link Cable passthrough as the e-Reader was designed primarily for use with original model Game Boy Advance systems; for Game Boy Advance SP systems, Nintendo would release the 6PIN Protection Cover (AGB-016), a plastic shell designed to permanently fit flush over the 6-pin Link Cable passthrough connector to prevent it from being damaged.[2] The device is also fully compatible with the Game Boy Player, allowing it to be used with Nintendo GameCube games.

The e-Reader is designed to scan special e-Cards to add content into games. e-Cards use Olympus's patented "Dot Code Technology" for data storage; each card has a series of dots printed on them that is interpreted by the e-Reader when scanned. These dot codes can be either short strips on the bottom of the card (1.4 KB), or long strips on the side (2.2 KB), and can be printed on both sides of the card. The device itself features 8 MB of flash memory and 64 MB of mask ROM data, allowing certain games to be saved to the e-Reader.

Nintendo-produced e-Cards

NintendoWiki logo.png This section is a stub. You can help NintendoWiki by expanding it.


Trivia

See also

External links

Niwalogo.png
e-Reader on other NIWA Wikis:
Bulbapedia logo.png
Bulbapedia
Super Mario Wiki logo.png
Super Mario Wiki

References

  1. Nintendo will not release E-Reader in Europe. Eurogamer (July 8, 2004). Retrieved June 3, 2017.
  2. Nintendo e-Reader 6PIN Protection Cover and Urban Champion. retrostuff.org (April 23, 2014). Retrieved June 3, 2017.


click for the Page "Game Boy Advance"